9
Disengaging steering assist
The operator must disengage the Steering Assist if an obstacle is in the line of travel. The operator
must disengage Steering Assist by using one of the following methods listed below.
Turning the steering wheel in the normal manner, stopping the machine, or pressing the remote
activation switch can disengage steering Assist.
Operational emergency safety steps
In case of an emergency, take one of the following steps to disengage Steering Assist:
• Press the brake and decelerate to under 0.6 mph / 1 kph;
• Turn the steering wheel in the normal manner; or
• Pressing the remote activation switch.
Other References
Contacting RAVEN INDUSTRIES
We welcome your feedback about this guide.
If you have any comments or suggestions for improvements, please let us know by contacting our
Customer Support Center by any of the methods below:
By phone
1-800-243-5435
By mail
Raven Industries
Flow Controls Division
205 E. 6th St.
Sioux Falls, SD 57104
By Email
fcdinfo@ravenind.com
To Next Page
Loading...
Need help?
General
