Index
P/N 016-4001-133 Rev. B 37
E
Envizio Pro
Calibration
Zeroing the Yaw Sensor 25
I
Introduction
Hydraulic Fittings 6
Kit Contents 6
Gen III Installation Kit 7
Unverferth Installation Kit 8
Preparing for Installation 5
Point of Reference 5
Recommendations 5
Tools Needed 5
Updates 6
ISO Calibration & Operation 19
Calibrating the Steerable Hitch System 21
ISO Screens 19
No Switch Box Installed 26
Operation 25
Programming SwitchBox Status 23
Programming the Left and Right Min Steer
Settings
23
Programming the Machine Settings 22
Programming the SPS Settings 24
Switch Box Installed 25
Zeroing the Yaw Sensor and Accelerometer 25
K
Kit Contents 6
S
Safety Features 31
Steerable Hitch Component Installation 11
Installing the Hydraulic System 11
Installing the Proximity Switch 15
Installing the Rotary Sensor 14
Installing the Steerabl Hitch Wiring
Connecting Steerable Hitch Harness to Valve and
Sensors 16
Connecting Steerable Hitch to John Deere Rate
Controller 16
Connecting Steerable Hitch to Raven ISO Product
Control System 16
Installing the Steerable Hitch Node 14
Installing the Steerable Hitch Wiring 16
System Diagrams 17
System Features 29
T
Troubleshooting 33
Node 33
System Alarms 34
System Issues 34
To Next Page
Loading...
Need help?
General
