CHAPTER 9
100 Viper/Viper 4+ Installation & Operation Manual
RTK
The following information and options will be available when configuring a compatible receiver and using the RTK
correction type:
RTK Format. Select the format of the correction messages sent from the RTK correction source.
AUTO. AUTO will automatically search and detect compatible RTK correction formats.
Network Type. Select the network from which the RTK corrections will be delivered.
Baud Rate. Select the baud rate at which the correction messages are transmitted from the RTK correction source.
Base Station ID. The base station identification number used for the current position solution. (Ex. Slingshot field
hub).
Distance. This value displays the baseline or distance from the vehicle position to the base station antenna.
Latitude, Longitude, and Elevation. The bottom portion of the prompt when set for an RTK correction source will
display the geographic coordinates and elevation of the current base station.
GLONASS
If the ROS device offers an integrated receiver
capable of using the GLONASS satellite
constellation, this mode will be displayed in the
lower, left corner of the Differential Settings tab.
Once unlocked, the optional GLONASS mode will
display the following status indicator when this
feature is being used in the current position
solution.
GPS OUTPUT TAB
1. Touch the Edit icon in the Machine Panel to view the machine devices.
2. Locate and select the GPS module. The GPS Global Settings prompt will display.
Edit GPS
GPS Output
Configuration
To Next Page
Loading...
