CHAPTER 8
76 Viper/Viper 4+ Installation & Operation Manual
To access the machine or implement profile settings for the current machine configuration, select:
To access the machine or implement garage to access machine or implement profile settings for any configured
profile:
The following options are also available in the machine or implement garage:
NOTE: The operator may choose to create a new machine profile when setting up a new machine
configuration. Refer to the Create a New Machine Configuration section on page 62 for additional
assistance with creating machine configurations.
Add New Profile. Touch the Add button in the upper, right corner of the machine or
implement garage to create a new profile.
Edit Profile. Select the Edit button in the upper, right corner of the machine or
implement garage to edit the selected profile.
Delete Profile. Touch the Delete button to remove the selected machine or implement
profile from the garage.
Any machine configurations associated with the profile may be incomplete until
another profile is assigned to replace the deleted profile.
MACHINE CONFIGURATION TAB
1. Touch the Edit icon in the Machine Panel to view the machine devices.
2. Touch any of the profile buttons for the machine or implements currently assigned to the machine
configuration.
Edit
or or
Self-Propelled
Machine Profile
Tractor Machine
Profile
Pull-Type
Implement Profile
Machine
Panel
Edit
Machine
Garage
Implement
Garage
Add New
Profile
Edit
Selected
Profile
Delete
Selected
Profile
Edit
or or
Self-Propelled
Machine Profile
Tractor Machine
Profile
Pull-Type
Implement Profile
Machine
Configuration
To Next Page
Loading...
