CHAPTER 14
136 Viper/Viper 4+ Installation & Operation Manual
ALARM HISTORY
Even after the alarm condition has been addressed or corrected, ROS provides a log of alert conditions
throughout the field operation.
To access the alarm history during an active operation:
1. Touch the Alarms icon along the bottom of the current display.
2. Select the Alarm History tab. ROS will display a list of previously detected alarm conditions.
Refer to the Active Alarms section on page 135 for details on the severity, alarm information, and category
information displayed.
ALARM SETTINGS
To access global alarm settings during an active field operation:
NOTE: Additional alarm settings may be available for various add on systems or features. Please refer to the
system or feature documentation for assistance with configuring alarms or defining alarm conditions.
1. Touch the Alarms icon along the bottom of the current display.
2. Select the Alarm Settings tab. The following global alarm settings will be accessible:
Audible Alarms. Enable the audible alarms option to receive an audible tone for alarm conditions detected during
the active field operation.
Popup Alarms. Enable the popup alarms option to display an alert prompt on the ROS display for alarm
conditions detected during the active field operation.
Audible Backup Alarm Enabled. Enable the audible backup alarm to receive an audible notification when GPS
detects the machine is backing up.
SCREEN LAYOUT CONFIGURATIONS
CREATE A NEW SCREEN LAYOUT
To create a new screen layout:
Screen
Configuration
Add
New
Layout
Edit
To Next Page
Loading...
Need help?
General
