CHAPTER 7
56 Viper/Viper 4+ Installation & Operation Manual
1. Insert a USB flash drive used with the ROS device and containing the scout group files to be imported.
2. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.
3. Select the File Manager utility and touch the USB Manager tab.
4. Touch the USB drop down and select the connected USB flash drive from which to import files.
5. Touch the file type drop down and select the “Scout Group” option.
6. Select the specific feature type in the scout groups category to import individual scout group features (e.g.
field boundaries, flags, lines, and zones) independently.
NOTE: Only one file type may be imported at a time. Perform the input procedure multiple times in order to
import multiple file types.
7. Touch the Next button in the lower, right corner of the USB manager tab. The USB flash drive and folder
structure will display.
8. Use the browser displayed to locate and select the “scoutRoot” folder which contains the scout group to be
imported. Scout group files currently stored on the USB flash drive will be found within the GFF folder structure
and are displayed in the lower portion of the USB manager tab.
For Example. “USB Drive Name” > Raven > GFF > “Grower Name” > “Farm Name” >
“Field Name” > scoutRoot > “Scout Group Name”
9. Touch the box displayed to the left of the listed file names to select specific files to import. Alternatively, touch
the Select All option at the top of the file list to select all files currently displayed.
10. With at least one file selected, select one of the following import actions:
•Copy - create a duplicate of the selected information on the ROS device, or
•Move - import the selected information to the ROS device and remove the information from the USB
flash drive.
The Import Files prompt will display.
11. Verify the list of files to be imported is correct. If the list requires further configuration, touch the Cancel button
to return to the USB Manager tab.
12. Touch the Import button to begin the file transfer process.
NOTE: When importing a Field Boundary or Zone not created on a Viper 4 (ROS) you must assign a Scout
Group Name for all features.
To Next Page
Loading...
