8
Machine Panel and Configurations: 65
MACHINE PANEL AND CONFIGURATIONS
7. The Machine Profile selection prompt will display if creating a new machine profile from scratch.
8. Use the drop down selections to set the machine profile type, sub-type, manufacturer, and model (if available)
of the machine to be created.
9. When the appropriate selections are set, touch the OK button. The equipment selection prompt will display.
10. Review the available OEM equipment options.
11. Depending upon the equipment offered from the manufacturer or the optional features installed on the
machine for which the profile is being created, select:
• no options to enter custom section profiles later in this procedure
• a specific option matching, or close to, the OEM equipment currently installed on the machine
• multiple, or all, equipment options if the machine offers multiple equipment configurations using
the installed equipment
NOTE: Deleted or adjust section groups as necessary later in this procedure for optional features or
customized configurations.
12. Touch the OK button to accept the selected equipment options and proceed with the machine profile
configuration.
To Next Page
Loading...
