ray FACE - Product Introduction; Usage; Intended Use; Components

RAYFace 2. Product Introduction
13
Product Introduction
Usage
RAYFace is a scanner that uses the onboard cameras to scan images of the subject’s face in all
directions simultaneously and reconstruct the scanned data to create a 3D model. The 3D face
data obtained from RAYFace is used for various modeling tasks.
Intended use
This product is a scanner which creates a 3D model by photographing a human face with multiple
cameras.
Components
Scanner body
AC Adapter
Power Cord
Quick Guide
Screwdriver,
Screws
Calibration body
Calibration base
LAN Cable
USB Cable
Actual components may look different from pictures shown above. Depending on
the option purchased or region, the type, quantity, and packaging of the
components provided may look different from the contents of this manual. For
inquiries regarding the components, contact Ray Customer Service or your local
distributor.