Copyright © 2012 Rayco Mfg - All Rights Reserved Rayco RG1645S Stump Cutter
Printed in U.S.A.
Service Section
45
Specifications
General
Weight: 2520 Lbs Maximum
Length: 121½” Maximum
Height: 72” Maximum
Width: 35½” Maximum w/Dual Wheels 53” Maximum
Chip Collection Capacity: 11cu. Ft. Minimum
Chassis Design: Formed ½” GR80 Steel, 3” x 3/16” Tube
Ground Drive: Self-propelled hydraulic , 4-wheel drive, variable speed
Swing Pivot Bearings: 13” diameter slewing ring
Fenders: Steel Bolt-on required
Toolbox: Required
Hydraulic Backfill Blade: Required
Tires: 18 x 8.5-10 R4 4 ply Rear - (4) Front - (2)
Swing-out Control Station
Viewing area: 18x24”
Height: 45½”
Heavy duty rubber debris curtain
Perimeter Photo-eye Safety Shutdown
Engine
Model: Kubota V1505-T-E3B, Tier 3, Vertical 4-cycle, liquid Cooled diesel
Number of cylinders: 4
Bore: 3.07” Minimum
Stroke: 3.09 Minimum
Displacement: 91.41 cu. In Minimum
Maximum no load RPM: 3000 Minimum
Gross HP at maximum no load RPM: 44HP Minimum
Maximum rated torque: 87ft lbs @2000 RPM Minimum
Cooling medium: Liquid cooled
Air Cleaner: Dual Element, Dry type
Oil Filter: Spin-on type
Fuel Tank Capacity: 6.5 gallons
Electrical System: 12 volts/40 AMP Alternator
*Specifications are subject to change with revi-
sions and/or build dates. All specifications listed
are current with this publication. Please note,
listed specifications may differ from your machine
if this re-printed manual.
To Next Page
Loading...
