Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 2000W CW laser
Raycus User Guide | Safety Information
1.4 Optical Safety
Any dust on the end of the collimator assembly can burn the lens.
CAUTION: DO NOT emit when the protective cap is
not removed, otherwise the lens or crystal will be damaged.
1.5 Electrical Safety
1) Make sure the product is grounded through the PE line of the AC power cord.
The grounding must be firm and reliable.
WARNING: Any interruption from the protective
earth will electrify the enclosure, which may result in
personal injury.
2) Make sure that the correct voltage of the DC power source is used.
CAUTION: Wrong wiring mode or power supply
voltage will cause an unrecoverable damage to the laser
device.
There are no devices that need to be used by operator in the laser. Please
do not try to open the laser cover, otherwise it may cause electric shock and
the warranty will be invalid accordingly.
1.6 Other Safety Rules
1) Do not directly view the laser output head when laser emitting. Avoid using
the laser in a dark environment.
2) Do not use fiber lasers in dark environments.
3) If this device is used in a manner not specified in this document, the
protection provided by the device may be impaired and the warranty will be
voided.
4) There are no user serviceable parts, equipment or assemblies inside the
product. All service and maintenance shall be performed by Raycus. In order
to prevent electric shock, please do not break the seal or uncover the shield.
Failure to comply with this instruction will void the warranty.
To Next Page
Loading...
Need help?
General
