Raycus RFL-C6000S-CE User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C6000S-CE
11
2.5 Precautions for Use
a) Before supplying the power to the device, make sure that the correct voltage of the AC
power source is used. Failure to connect power source correctly will damage the
device.
b) Failure to follow the instructions may cause malfunction and damage to the device,
such damage is not covered by warranty.
c) It is very important to ensure the cleanness of the calibrated laser output head, other
wise it will cause irreparable damage to the laser.
d) Please inspect the output head carefully for dust or other contaminations. Use
appropriate lens paper to clean it if necessary. Do not touch the output lens at any time;
as well as remember to cap the output head when it is not in use, and make sure the cap
is clean.
e) Failure to follow the specified instructions may result in the loss of laser power, and
such loss will not be covered by the warranty.
2.6 Specifications
Table 4 Specifications
Number
Index
Condition
Minimum
value
Standard
value
Maximum
value
Unit
Fiber technical index
1
Operation Mode
Nominal
Output
Power
Continuous Wave / Modulated
2
Nominal Output
Power
Water
Temperature
22±1℃
6000
6100
6200
W
3
Emission Power
Range
Nominal
Output
Power
10
100
%
4
Emission
Wavelength
Nominal
Output
1075
1080
1085
nm

Raycus RFL-C6000S-CE Specifications

General

Brand	Raycus
Model	RFL-C6000S-CE
Category	Measuring Instruments
Language	English