Raymarine A series User Manual (English)

Other manuals for Raymarine A series

Installation And Operation Instructions464 pages

Questions and Answers:

D
David GonzalesAug 29, 2025
Why does my Raymarine A series show a “No Fix” GPS status?
- T
  Timothy CraneAug 29, 2025
  If the Raymarine Marine Equipment displays a “No Fix” GPS status icon, it could be due to several reasons. The geographic location or current conditions might be preventing a satellite fix; in this case, check periodically to see if a fix is obtained in better conditions or another geographic location. Alternatively, there may be a GPS connection fault, so ensure that external GPS connections and cabling are correct and fault free. Finally, the external GPS antenna might be poorly positioned, so ensure the GPS antenna has a clear view of the sky.
R
Rhonda CobbSep 3, 2025
Why is my Raymarine A series Marine Equipment showing the wrong speed?
- F
  farmerlaurenSep 3, 2025
  If you're getting an incorrect speed reading (DST) on your Raymarine Marine Equipment, check that the paddle wheel is clean. Add a speed offset if no speed offset is currently set. Re-calibrate the equipment. If the transducer does not have a speed element, install a transducer with a speed element to enable speed readings.
A
Amanda CarterAug 28, 2025
What to do if my Raymarine A series Marine Equipment product will not boot up (re-boot loop)?
- Q
  quinnrandyAug 28, 2025
  If your Raymarine product is stuck in a reboot loop, the issue might stem from the power supply and connection, so check the solutions for ‘Products does not turn on or keeps turning off’. Another potential cause is software corruption. In that case, try re-flashing the latest software from the Raymarine website. As a last resort on display products, you can perform a ‘Power on Reset’. Be aware that this will erase all your settings, presets, and user data, reverting the unit to factory defaults.
R
riggsashleySep 10, 2025
Why is the touchscreen not working properly on my Raymarine Marine Equipment?
- R
  Robert KennedySep 10, 2025
  If the touchscreen on your Raymarine Marine Equipment does not operate as expected, first check if the touch lock is enabled and turn it off using the Joystick on the home screen. Ensure you are operating the screen with bare fingers or conductive gloves. Calibrate the touchscreen using the setup menus. If there are saltwater deposits on the screen, carefully clean and dry the screen as instructed.
M
Michelle NguyenSep 4, 2025
Why won't my Raymarine A series Marine Equipment connect wirelessly?
- K
  Kayla JonesSep 4, 2025
  If you have no wireless connection on your Raymarine Marine Equipment, ensure that Wi-Fi is enabled on the multifunction display (Homescreen: > Set-Up > System Settings > Wireless Connections > Wi-Fi > On). Also, make sure that the 'Wi-Fi' option is enabled on the iPhone and that the Raymarine connection is selected as the Wi-Fi network. If a passcode has been specified for the multifunction display's Wi-Fi connection, ensure that the same passcode is entered into the iPhone when prompted.
M
Michelle NguyenSep 6, 2025
Why is the image upside down on my Raymarine Marine Equipment?
- B
  Bryan FrancisSep 6, 2025
  If the image on your Raymarine Marine Equipment is inverted (upside down), ensure that the Ball down setting within the thermal camera system setup menu is set correctly.
J
Julie WattsSep 9, 2025
Why are the controls erratic or unresponsive on my Raymarine A series?
- T
  Thomas TorresSep 9, 2025
  If you are experiencing erratic or unresponsive controls on your Raymarine Marine Equipment, check that the controller and thermal camera are correctly connected to the network. Verify the status of the Raymarine network switch, and ensure that SeaTalkhs / RayNet cables are free from damage. Make sure that no other controllers are in use at the same time. Check the power and network cabling to the controller and PoE injector (if used). If available, check other controllers to eliminate the possibility of a more fundamental camera fault.
D
diana74Sep 13, 2025
What to do if there is no Raymarine app on my device for Marine Equipment?
- B
  bradleyortizSep 13, 2025
  If there is no Raymarine app on your device, download the required Raymarine app from the relevant application store and start the Raymarine app on your device. Ensure that Mobile applications are enabled on the multifunction display by selecting either “Viewing only” or “Remote Control” (Homescreen: > Set-Up > System Settings > Wireless Connections > Mobile Apps).
E
evelynesparzaAug 26, 2025
How to troubleshoot Raymarine A series Marine Equipment that does not start up?
- N
  Nicholas WarrenAug 26, 2025
  If your Raymarine Marine Equipment system or part of it doesn't start, first check the relevant fuses and breakers. Also, ensure the power supply cable is in good condition with tight, corrosion-free connections. Finally, verify the power source provides the correct voltage and sufficient current.
K
Kelly DrakeAug 25, 2025
How to troubleshoot Raymarine Marine Equipment that won't start?
- S
  Steven SimmonsAug 26, 2025
  If your Raymarine Marine Equipment system or part of it does not start up, there could be a power supply problem. Check the relevant fuses and breakers. Also, verify that the power supply cable is in good condition and that all connections are tight and free from corrosion. Finally, ensure that the power source provides the correct voltage and sufficient current.

Raymarine A series Specifications

General

Display Type	LCD
Chartplotter	Yes
Display Size	7"
Display Resolution	800 x 480 pixels
GPS	Yes
Sonar	Yes
Cartography	Navionics, C-MAP
Radar Support	Yes
Waterproof Rating	IPX6