?
More information ....
See the 'Using the Chart' chapter in the Reference Manual, for more information
on routes.
D6730_2
ROUTE...
Press
PLACE WAYPOINT
The dotted line
will change to
a solid one.
BUILD NEW
ROUTE
Press
Move cursor into
appropriate area
Select a
suitable scale
PLACE WAYPOINT
Press
Move cursor to
required position
for first waypoint
RANGE
IN
OUT
SAVE ROUTE
PRESS
PRESS
OK
How do I build a route by placing waypoints on screen?
Move cursor to required
position for next waypoint.
A dotted line appears
between previous
waypoint and cursor.
If you place a waypoint at the incorrect position,
press UNDO WAYPOINT.
UNDO WAYPOINT
Press
What is a route?
A route is made up of a series of waypoints. These waypoints can either be placed specifically for that
route and/or you can use existing waypoints. You can save a route for future use or follow it immediately
(Quick Route). Routes are stored in a route list. If you have networked two or more E-Series displays, the
routes are stored in the master display and are transferred to the other displays via the SeaTalk High
Speed network.
Routes can be named, edited, erased and archived. After routes have been created you can choose which
ones are displayed on your chart.
If a route is being followed, i.e. the active route, the current leg is shown as a dotted line and any
previous legs are removed from the screen, although any waypoints will remain displayed.
Basic Navigation
How do I get to a point?
Card No. 8
SHOW/HIDE
ROUTES
FOLLOW ROUTE
OPTIONS
REVIEW AND EDIT
ROUTES
BUILD NEW ROUTE TRACKS
To Next Page
Loading...
