Raymarine G-Series - Video Setup

Rotarycontrol—isusedforrotatingthecameraleftor
right(panning).
Trackpad—isusedforrotatingthecameraleftorright
(panning),ortiltingthecameraupordown.
RANGE
IN
OUT
Rangekey—isusedtozoominandout.
Resettingthethermalcameratothehome
position
Inthethermalcameraapplication:
1.SelecttheCAMERAHOMEsoftkey.
Thecamerareturnstoitscurrentlydenedhomeposition,and
the“Home”iconappearson-screenmomentarily.
7.10Videosetup
Toensurecorrectoperationofthevideoandentertainmentsystem
youshouldsetupandtestallvideoandaudiochannels.
Beforeproceedingensurethatthevideosourcesareoperating.
Foraudioyoushouldensurethatthevessel’saudioamplieris
switchedonandtheappropriateinputselected.
Checkthevideoandaudiooutput
Youwillneedto:
•SelecttheVideoapplicationfromthehomescreen.
•Setupthevideoinputs.
Selectingvideosourceinputtype
Thesystemiscompatiblewithcompositeands-videoformats.
Inthevideoapplication:
1.PresstheMENUbutton.
2.SelectVideoSetup.
3.SelecttheCongureVideoSystemmenuitem.
4.SelecttheserialnumberfortheGVMvideomodulethatthe
videosourceisconnectedto.
5.SelecttheTypemenuitem.
6.SelecttheCompositeorS-Videooption,asappropriate.
NamingGVMvideomodules
Inthevideoapplication:
1.PresstheMENUbutton.
2.SelectVideoSetup.
3.SelecttheCongureVideoSystemmenuitem.
4.SelecttheserialnumberthatcorrespondstotheGVMvideo
modulethatthevideosourceisconnectedto.
5.SelecttheRenameGVM400unitmenuitem.
114
G-Seriesinstallationinstructions