40 ST3000 Wheel Drive Autopilot - Owner’s Handbook
4 Installing the Wheel Pilot
Raymarine produce a range of SeaTalk accessory cables you can use
to connect the wheel pilot to SeaTalk instruments and control units:
• flat plugs for recent SeaTalk equipment (e.g. ST30, ST40, ST60)
• round plugs for older SeaTalk equipment (e.g. ST50)
Conversion cables - flat moulded plug to round plug
Extension cables - flat moulded plugs at each end
D5554-1
Part no. Type Length
D187 Flat moulded plug to male round plug 0.15 m (6 in)
D188 Flat moulded plug to female round plug 0.3 m (12 in)
Interface cables - flat moulded/round plug to bare ends
Part no. Type Length
D229 Flat moulded plug to bare ends 1 m (3 ft 3 in)
D179 Male round plug to bare ends 3 m (9 ft 10 in)
D181 Female round plug to bare ends 3 m (9 ft 10 in)
Part no. Type Length
D284 Flat moulded plugs at each end 1 m (3 ft 3 in)
D285 Flat moulded plugs at each end 3 m (9 ft 10 in)
D286 Flat moulded plugs at each end 5 m (16 ft 5 in)
D287 Flat moulded plugs at each end 9 m (29 ft 6 in)
D288 Flat moulded plugs at each end 20 m (65 ft 6 in)
Extension cables - round plugs at each end
Part no. Type Length
D124 Male round plug to female round plug 1 m (3 ft 3 in)
D125 Male round plug to female round plug 3 m (9 ft 10 in)
D126 Male round plug to female round plug 6 m (19 ft 8 in)
D154 Male round plug to female round plug 9 m (29 ft 6 in)
81194_1.book Page 40 Wednesday, July 25, 2001 12:10 PM
To Next Page
Loading...
