AUTO CLOCK SETTING
The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TVNCR
is connected to an Antenna or Cable system and it is turned off. As the TVNCR searches for a receivable
station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes
to set itself.
AUTO CLOCK SETTING
1. Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2. Plug the AC Power cord to the AC outlet.
3. Make sure the TV/VCR is turned off.
• If you press the POWER button, the Auto Clock set is not effective.
4. Wait at least three minutes and press the POWER button.
5. Press the CALL button to check the clock on the screen.
6. If the clock is not set, check the Antenna condition. The Auto Clock does not function depend on the reception
condition.
• ==
AUTO CLOCK ADJUSTMENT
I The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TVNCR.
• If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on.
J
• The Auto Clock Adjustment is not effective when the timer recording is in the stand by mode.
• The Auto Clock Adjustment is not effective when the a difference of more than 5 minutes exits between the built-
in clock time and the actual time.
TO SET AUTO CLOCK TO OFF
frWhen shipped from factory the AUTO CLOCK option is set to ON. •
But if you do not want Auto Clock set (Adjustment):
1. Turn on the TV/VCR.
2. Press the MENU button.
3. Press the SET/TRACKING + or- button to select the SYSTEM SET-UP option, then press the ENTER button.
4. Press the SET/TRACKING + or- button to select the AUTO CLOCK option.
5. Press the ENTER button to select OFF.
6. Press the MENU button repeatedly to return to the normal screen.
• When the AUTO CLOCK is set to OFF, the Auto Clock adjustment is not functioned.
Set the clock manually (see page 18). J
TO SET STANDARD TIME
"-in the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR •
recognize the wrong station for the Auto Clock set.
To correct the situation:
1. Press the MENU button.
2. Press the SET/TRACKING + or- button to select the SYSTEM SET-UP option, then press the ENTER button.
3. Press the SET/TRACKING + or - button to select the STANDARD TIME option, then Press the ENTER button.
4. Press the SET/TRACKING + or - button to select your time zone, then press the ENTER button.
GMT - 4 hours (GMT: Greenwich Mean Time)ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
AUTO
GMT - 5 hours
GMT - 6 hours
GMT - 7 hours
GMT - 8 hours
GMT - 9 hours
GMT - 10 hours
AUTO SET
5. Press the MENU button twice to return to the normal screen.
J
16
To Next Page
Loading...
Need help?
General
