REMOTE CONTROL
2O
16 21 --
j 22
23
J 24
25
26
27
28
29
DESCRIPTION OF CONTROLS
1. POWER Button * Press to turn the TVNCR on.
Press again to turn the TVNCR off.
2. Direct Channel Selection Buttons (0_9) * Allows
direct access to any channel.
3. CALL Button * Displays the present time/day of the
week, channel, counter, speed selection (and VCR
mode if VCR is playing) on the TV screen.
4. REC/OTR Button - Press once to start normal
recording. Additional presses activate Instant Timer
Recording.
5. REW (Rewind) Button - In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
6. SPEED Button - Sets the tape speed for recording.
7. MENU Button _ Press to display the On-Screen
menu function.
8. PROGRAM Button - Press to confirm the pro-
grammed timer recording and ON/OFF timer.
9. SKIP SEARCH Button - Press in the playback
mode to search forward in 30 second increments
to a maximum of 3 minutes.
10. TV MONI. Button * Used to temporarily view a TV
channel selected on the TVNCR while in the
playback mode.
11. CHANNEL + / - Buttons * Press the + button to
change to a higher numbered channel set into
memory. Press the - button to change to a lower
numbered channel set into memory.
12. QUICK VIEW Button - Switches between the present
channel and the last channel selected.
13. MUTING Button - Press to turn offthe sound.
Press again to turn the sound back on.
14. F.FWD (Fast Forward) Button _ In the Stop mode,
this button rapidly winds the tape forward. In the
Play mode, this button activates forward search.
15. AUTO TRACKING Button -Allows automatic
adjustment of tracking to minimize picture noise
during playback.
16. TV/CAP/TEXT Button - Switches between Caption,
Text and TV modes for Closed-Captioned programs.
17. SLEEP Button - Sets the TV to turn off automati-
cally after up to 120 minutes.
18. INPUT SELECT Button - Switches the program for
viewing between the TVNCR and external input
sources.
19. PLAY Button * Press to play a prerecorded tape.
20. SET/TRACKING + / - Buttons - Used to set or
adjust in the menu mode. During playback, they are
used to adjust tracking manually.
21. COUNTER RESET Button * Used to reset the
counter to 00:00:00.
22. EJECT Button _ Press to eject the tape.
23. VOLUME + / - Buttons - Press the + button to
increase, or the - button to decrease the volume
level.
24. PAUSE/STILL Button * During recording, this
button temporarily stops the tape. During playback,
it stops the tape and displays a still image on the TV
screen.
25. STOP Button * Press once to stop the tape.
26. ENTER Button * Use to enter information in the
menu mode
27. CANCEL Button - Used to clear the selected
program and to move the cursor backward.
28. TIMER REC Button - Used to set the TVNCR to
start recording at a preset time.
29. ZERO RETURN Button - Use to stop the tape
when the counter reaches 00:00:00.
9
To Next Page
Loading...
Need help?
General
