To Next Page

To Previous Page

USING THE REAL TIME TAPE COUNTER

The On*Screen Real Time Tape Counter shows the tape running time in Hours, Minutes and Seconds.

You can easily determine how long the tape has been running or how much time is left on the tape.

TO VIEW THE COUNTER DISPLAY

Press the CALL button to display the Real Time

Tape Counter.

CALL

Press the COUNTER RESET button to set the

counter to "00:00:00".

COUNTER

RESET

Begin Playback or Recording to start the tape.

the counter will display the elapsed time.

PLAY

When you wish to make the counter disap-

pear, press the CALL button once again.

CALL

NOTES: • If you rewind the tape from "00:00:00", a minus sign ("-") will be displayed in front of the time.

• When you load a tape, the counter will reset to "00:00:00".

• The counter does not function on nonrecorded (blank) sections of the tape. When you rewind,

fast forward or play tapes through blank sections, the counter stops.

Questions and Answers:

Need help?

Do you have a question about the RCA T09085B and is the answer not in the manual?

RCA T09085B Specifications

General