RECORDING A TV PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
To turn on the TVNCR, press the POWER
button.
POWER
Load a cassette tape with the erase prevention
tab intact.
Press the SPEED button to select the desired
tape speed SP or SLP. The counter and SP or
SLP will appear on the screen about 4 sec-
onds.
SPEED
Set the TV/CATV option to the appropriate
position. (See page 23.)
TV - VHF/UHF channels
CATV - CABLE TV channels
NOTES: • If power is switched off during recording, the TV set goes off and the VCR continues to record. Press the
STOP button to halt the recording and turn off the VCR.
• The TV/VCR Channel cannot be changed during recording.
40
To Next Page
Loading...
Need help?
General
