To Next Page

To Previous Page

LOADING AND UNLOADING A VIDEO CASSETTE

Use only video cassette tapes marked _.

rPush the center of the tape until it is automatically retracted into the TV/VCR. •

AUTOMATIC POWER ON AND PLAY

When loading a cassette tape without the erase prevention tab intact, the TVNCR will turn on automatically

and playback will start immediately.

Insert the cassette with its labelled side facing you.

An inverted video cassette cannot be inserted.

_-- -%

UNLOADING

To unload a video cassette, press the EJECT

button on the remote control, or press the

STOP/EJECT button on the TVNCR twice. The

first press will stop the tape in any mode. The

second press will eject the tape.

EJECT

AUTOMATIC EJECT

If the TVNCR automatically rewinds the tape to the

beginning (AUTO REWIND FEATURE), the tape will

=be ejected automatically. (See NOTE on page 41.)

NOTES: • Always eject the tape when not in use.

• The cassette tape can be ejected even if the POWER is "OFF".

Pull the cassette out.

RCA T09085B User Manual

Questions and Answers: