DUPLICATING A VIDEO TAPE
if you connect the TVNCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
CONNECTIONTO ANOTHER VCR
PLAYBACK VCR
RECORDING TV/VCR
AUDIONIDEO CORD (NOT SUPPLIED)
Press the INPUT SELECT button twice to
select AUDIO/VIDEO input position. The "LINE
2" will appear on the screen.
INPUTSELECT
NOTE: You can also use the rear AUDIO/VIDEO IN
Jacks. Select "LINE 1" by pressing the INPUT
SELECT button, j
CONNECTION TO CAMCORDER
For duplicating a previouslyrecorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
camcorder dubbing hook-up is shown below.
PLAYBACK
CAMCORDER
AUDIONIDEO CORD
(NOT SUPPLIED)
RECORDING TV/VCR
To VIDEO/AUDIO IN _
H
Press the REC/OTR button
on the remote control of the
TV/VCR, then press the
PAUSE/STILL button.
REC/OTR PAUSE/STILL
Press the PLAY Button on the
playback VCR, then press the
PAUSE/STILL button.
PAUSE/
STILL
Press the PAUSE/STILL
buttons on both units
simultaneously to begin the
duplicating process.
PAUSE/
PAUSE/STILL STILL
%%
NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
• Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
To Next Page
Loading...
Need help?
General
