ONE-TOUCH TIMER RECORDING (OTR)
The One-Touch Timer Recording feature provides a simple and convenient way to make a timed recording.
EXAMPLE: One-Touch timer recording for 30 minutes.
Press the POWER button
to turn on the TVNCR.
POWER
Load a video cassette
with the erase prevention
tab intact.
Press
to select the desired tape
speed (SP or SLP).
SP or SLP will appear on
the screen.
SPEED
%
D
Set the TV/CATV option
to the appropriate setting,
TV - VHF/UHF channels
CATV - CABLE TV channels
Press the Direct Channel
Selection buttons or CHANNEL
+ or - button to select the
channel to be recorded.
(Example: Channel 12)
CHANNEL
0 1 2
o.
Press the REC/OTR button"
to begin recording. Press
the button again to stop
recording after 30 minutes. Each
additional press of the REC/OTR
button will increase recording time
as shown below, up to a maximum
of 5 hours. "OTR" will appear on
the screen.
REC/OTR
CH 012
NOTES: • Press the REC/OTR button to increase the time needed for recording. (See the chart below.)
Press _t_ 85t_:ooS 9 times
Recording time NORMAL REC
• To cancel OTR, press the STOP button.
• The TV/VCR channel cannot be changed during recording.
To Next Page
Loading...
Need help?
General
