To Next Page

To Previous Page

TIMER RECORDING (CONTINUED)

Set the start time, end time, channel and tape speed as in step 4.

-- SET/TRACKING+

ENTER

r TIMER REC SET ]DATE 23{THUJ}

START 7 ;00 PM

END 9;30PM /

CH _7¢

SPEED1_

1,<+/-_E"TER/CA"CEUME"U>J

iJ2:Eo:T 2, 2i: ,2i;

To set the timer for another program, press the

SET/TRACKING + or - button until the number

of the second program blinks, then press the ENTER

button. Repeat steps 4 to 5 to set the second program.

M ress the TIMER REC button. The T.REC

indicator will light. The Timer is programmed, when

the programmed time is reached, the recording is

automatically started.

TIMER REC

T.REC

mOrn

To cancel timer recording, press the button again and

T.REC indicator will go out.

NOTES: • The VCR section cannot be used while the T.REC indicator is lit. If you want to use the VCR operation,

press the TIMER REC button to deactivate the timer.

• After a power failure or disconnection of the power plug, all programmed recording setting and time display

will be lost upon resumption of power. In this case, reset the clock (see pages 16-18.) and reprogram any

timer recordings.

• If you want to correct the digits while setting, press the CANCEL button until the item you want to correct,

then press the SET/TRACKING + or - button to correct the desired setting.

RCA T09085B User Manual

Questions and Answers: