SAM 400 SPEED-AREA-DISTANCE METER
3
Overview
The RDS SAM 400 Speed-Area-Distance Meter is a versatile, simple to use
instrument. It displays to the vehicle operator,
?? Forward Speed (km/hr or miles/hr)
?? Partial and Total Area (hectares or acres)
?? Distance (km or miles)
?? Instantaneous Work Rate (Ha/hr or acres/hr)
?? Engine Hours
?? RPM (optional)
The displayed information can be converted from Metric to Imperial units at
any time.
The instrument also has two programmable forward speed alarms that also
operate two outputs that may be utilised to control (unspecifed) aspects of a
machines operation.
The SAM 400 can be programmed by the operator for implements of any
practical width and for any sensing wheel size.
The SAM 400 system comprises :
?? The Head Unit.
?? A Forward Speed Sensor kit.
?? An automatic cut-out switch to prevent area accumulation when turning on
headlands etc.
?? A power supply kit.
?? Shaft Speed Sensor (optional)
If the SAM 400 is to be used on a number of vehicles, each vehicle can be
equipped with a 'transfer kit' to enable the head unit only to be transferred
simply between vehicles.
The SAM 400 can also be used in conjunction with the RDS Area
Compensation Interface (ACI) or Width Compensation Interface (WCI) to
ensure accurate area monitoring when using partial implement width.
To Next Page
Loading...
