RDS SAM 400 - Operation

SAM 400 SPEED-AREA-DISTANCE METER
4
Operation
Figure 1
The instrument will normally be powered through the vehicle ignition system
and will be on whenever the vehicle ignition is on. The display is permanently
illuminated.
Channel Selection
Simply press the button to cycle through the six different channels that
can be displayed.
`
ENTER PROGRAM
MODE
Decrease Cal
Factor
Increase Cal
Factor
Override Area/
Distance
accumulation
or
Reset Part/Total
Area/Distance
SELECT CHANNEL
Fwd Speed
RPM
Channel Indicator
Part/Total
Area
Part/Total Distance
Work Rate
Engine Hou
rs