Manual opening and closing in case of failure (RED)
6
BAL_SYS20_RED_EN_2V2_REC_102-020110693 19/ 27
▪ Besides, unscrew both accumulator (storage
battery) fuses.
▪ The accumulator is located under the casing.
▪ Slide the door by hand into the closed posi-
tion.
▪ Turn the unlocking lever clockwise and hold it
in this position so that the door can close
completely.
▪ The door will lock as soon as you release the
lever.
▪ Manually check that the door is properly
locked.
▪ Leaving the building in only possible through a
second exit.
Inform service point
(Telephone number displayed on BDE-D).
To Next Page
Loading...
