Functions and safety check
9
BAL_SYS20_RED_EN_2V2_REC_102-020110693 26/ 27
Test / inspection Procedure Expected result
Continuous floor guide (instead
of punctual door leaf guide)
▪ Set the door to manual oper-
ation (see chapter "Selecting
special functions")
▪ Clean all guides from dirt,
cigarette butts, etc.
▪ The door leaf must be
properly guided
▪ The movement of the door
must not be obstructed by
dirt
Drive guard cover
▪ Check the fastening of the
drive guard cover
▪ It must be completely closed
and reliably engage in the
hinges
Protective wing (optional - de-
pending on national regulations)
▪ Check the mechanical condi-
tion of the protective wing
▪ In particular, check the clos-
ing mechanism
▪
protective wing should
prevent all crushing and
shearing points
To Next Page
