RE-ZERO INPUT*
If the totalizer/linearizer option is installed, this selects whether the signal can
be re-zeroed (tared) through the front panel.
“tArE” < > “yES” or “NO”
Note: The tare buffer can be cleared by “stepping” through “Pro 2”, using the P
button or via serial transmission.
Depending on functions selected under Pro 3 and Pro 6, alarms, hysteresis, peak,
and valley values can be monitored and/or changed when PGM. DIS. is tied to
COMM. This provides a “QUICK PROGRAMMING” method for “day to day”
process changes. (See QUICK PROGRAMMING SECTION for more details.)
*Note: This function operates independent of the state of the “PGM. DIS.” Pin.
-11-
To Next Page
Loading...
