Redback Technologies
Owner’s Guide – Redback Smart Hybrid System - v 3.8
29
12.7 SM3000 Smart Meter diagnostics
The Redback SM3000 Smart Meter is usually located at the main switchboard. It
detects the grid energy traffic of up to 3 phases and indicates if the site overall is
importing or exporting energy to the grid. This information informs inverter operation.
Power
ON: Meter has power.
OFF: Meter does not have power or has failed.
Energy
Flow
ON: Site is consuming energy from the grid.
Flashing: Site is exporting energy to the grid.
OFF: Energy flow is not detectable.
Comm’s
Flashing: Transmitting data.
5x Flash: Reset in progress.
To Next Page
Loading...
