Redback SH5000 - Features and benefits of your Redback system

Redback Technologies
Owner’s Guide – Redback Smart Hybrid System - v 3.8
7
Features and benefits of your Redback system
SYSTEM FEATURE
BENEFIT
REQUIREMENT
Internet connected
Inverter monitoring and management using the
MYRedback app or Redback portal.
Remote viewing of inverter status.
Permanent internet connection
using your
Wi-Fi or ethernet based
home network.
MYRedback app and
Redback portal
Monitor your home energy performance in real time,
including up to 3-phases of grid consumption, using
high quality, detailed charts.
See your true usage patterns and tune your energy
consumption, storage, export, and backup plan
accordingly.
Share system access with family, tenants etc.
Permanent internet connection
using your
Wi-Fi or ethernet based
home
network.
All-in-one design
Neat appearance; Easy to keep clean.
Status panel
Colour coded LEDs to aid diagnostics.
EMS
The Energy Management System (EMS) is the inverter’s
internal Control Board.
Internet connection for occasional
software updates.
Switchgear hatch
Convenient control of solar and battery connections.
Ability to bypass inverter backup without affecting
house or backup circuits.
EMS LEDs aid diagnostics.
Low maintenance
Homeowners can complete essential annual
maintenance. A service call is not required.
Basic mechanical skills and tools.
Supports multiple batteries
Improved management and consumption of self-
generated energy. Start small, then extend the storage
capacity to suit your actual usage patterns.
Ask your installer for advice on
upgrading your system storage.
Backup functionality
Some devices remain available during a grid outage if
solar power or battery are available.
Optional backup circuit required
and active; Battery is required.
Relay control
Up to four relay-switched house circuits or devices can
be timer controlled using the Redback app or portal.
Relay connected circuits.
#3 and #4 relays are optional
extras.
Grid power quality
monitoring
The inverter can self-protect from poor quality grid
power and recover when quality improves.
Internal overload protection
The inverter will self-protect if it detects excessive heat
or excessive internal currents.
Battery Management
System
Batteries self-monitor to manage heat, State of Charge
(SoC), and charge and discharge rates, to extend
battery life.
Critical setting protection
Critical system settings may only be changed by
electrically qualified personnel.
Solar array ground fault and
insulation monitoring
Electrical safety for all parts of your system.