illustrate:
First, turn the manual/automatic knob of the console to the left manual position.
●The feedback pulse value in the screen shows the basic parameters that the servo motor must have for
operation;
● The same function as the traction knob switch of the console;
● It has the same function as the operation desk bending knob switch, the middle is the
function of returning to the origin;
●
The above buttons respectively operate the extension and retraction of the bending arm, the central axis
mold, the return device, the material receiving rack, and the blanking rack.
B) Overall compensation function
When pressing the touch screen to run the screen
To Next Page
Loading...