Vacuum spray degassing — 06.07.2016 - Rev. B English —
Prior to shipping, this device was carefully inspected and packed. Damages during transport cannot be excluded.
Proceed as follows:
1. Upon receipt of the goods, check the shipment for
• completeness and
• possible transport damage.
2. Document any damage.
3. Contact the forwarding agent to register your complaint.
Condition of the delivered device:
• Check all screw connections of the device for tight seating. Tighten the screws as necessary.
Preparing the connection of the device to the plant system:
• Barrier-free access to the plant system.
• Level and solid placement surface for the device.
• Frost-free, well-ventilated room.
– Room temperature > 0 - 45 °C.
• Drain for drain water.
• Filling connection.
– DN 15 according to DIN 1988 T 4.
• Electric connection.
– 230 V~, 50 Hz, 16 A with upstream ELCB (tripping current: 0.03 A).
To Next Page
Loading...
Need help?
General
