Reflex Servitec 30 User Manual

Controller
38
— English Vacuum spray degassing — 06.07.2016 - Rev. B
9.2
Customer menu
Use the Customer menu to correct or determine system-specific values. In the course of commissioning, the factory settings must be
adjusted for the system-specific conditions.
see chapter 9.5 "Parametrising the controller in the Customer menu" on page 40 .
9.3
Service menu
This menu is protected with a password. It can be accessed only by the Reflex Customer Service. A partial summary of the settings stored
in the Service menu is proved in the Chapter Default settings, see chapter 9.4 "Default settings" on page 39 .

Reflex Servitec 30 Specifications

General

Brand	Reflex
Model	Servitec 30
Category	Paint Sprayer
Language	English