— English Vacuum spray degassing — 06.07.2016 - Rev. B
This device has been manufactured to the current state of the art. However, some residual risk cannot be excluded.
Risk of burns on hot surfaces
Hot surfaces in heating systems can cause burns to the skin.
• Wear protective gloves.
• Please place appropriate warning signs in the vicinity of the device.
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there is a risk of burns and other injuries at the connection
points, if pressurised hot water or hot steam suddenly escapes.
• Ensure proper installation, removal or maintenance work.
• Ensure that the system is de-pressurised before performing installation, removal or maintenance work at the connection points.
Risk of injury upon coming into contact with glycol containing water
Contact with glycol containing water in plant systems for cooling circuits can result in irritation of the skin and eyes.
• Use personal protective equipment (safety clothing, gloves and goggles, for example).
Risk of injury due to heavy device weight
The device weight may cause physical injury or accidents.
• If necessary, work with a second person during assembly or disassembly.
Device damage during transport
Improper transporting procedures can cause damage to the connections for degassing and makeup lines.
• Use suitable covers to protect the connections against damage.
• Only transport the device in an upright position.
Property damage during transport
Improper transporting procedures may cause damage.
• Fasten the device with suitable transport securing means such as straps.
To Next Page
Loading...
Need help?
General
