EasyManua.ls Logo

REFUSOL 40K - Device Start

REFUSOL 40K
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REFU Elektronik GmbH REFUsol 40K / 46K-MV 37
Only confirm the country code if you are absolutely sure it is correct.
If you are not sure, press
ESC
to cancel your selection and correct the selection.
If the country code is to be accepted, then confirm with
OK
.
A restart then takes place:
"ERROR" and "GROUND FAULT" status LEDs flash red alternately.
Pos: 50 /Inverter M anuals/Betri eb/Inbetrie bnahme/Gerätest art/WR @ 1\mod_14050 71129125_64 1.docx @ 706 2 @ 2 @ 1
5.5
Device Start
Solar modules are irradiated with sufficient sunlight.
Country code is set.
Time and date is set.
The following procedure follows:
Self-test All status LEDs are lit for approx. 6 seconds
Check “START” status LED lights orange.
Activation “START” status LED lights orange/LED “ON” flashes green.
Feed in “ON” status LED lights green/normally all other status LEDs are off.
Pos: 51 /Inverter M anuals/Betri eb/Inbetrie bnahme/Bedienf eld/WR @ 1\m od_1405 071297309_6 41.docx @ 7068 @ 2 @ 1
PAC
8260
W
VAC 405 V
VDC 634 V
E day 27.6 kWh
Reboot
Menue

Table of Contents

Related product manuals