REFUSOL 40K - Sending Config; Portal Test Function

46 REFUsol 40K / 46K-MV REFU Elektronik GmbH
6.8 Sending Config
Menu Configuration > Portal monitoring > Config sending
The configuration data is required by REFUlog in order to recognise the inverter. If you want to send it
manually, select the menu and set the parameter to 1. If the sending was successful, the parameter will be
set back to 0 automatically.
Pos: 69 /Inverter M anuals/Konf iguration/Po rtal Testfun ktion/WR @ 1\mo d_14050768 41099_641.d ocx @ 7168 @ 2 @ 1
6.9 Portal Test Function
Menu Configuration > Portal monitoring > Portal Test
On request of our service, you can send a test data package to the portal. Open the menu and select „yes“.
Pos: 70 /Inverter M anuals/Fehl erbehebung/ Überschrif t/Fehlerbehebu ng @ 1\mo d_140662400760 2_641.docx @ 76 43 @ 1 @ 1