23
Auxiliary Equipment Operation
POWERTOWER-TYPICAL
As part of the innovative design the PowerTower hinges
forward for tight overhead clearances such as bridges and
restricted storage situations.
e PowerTower features an aluminum framework with
a multi-layered powder coated nishing process along
with the ability to anchor major electronic equipment.
TYPICAL POWER TOWER
e PowerTower can be hinged forward for clearance
purposes. Use the switch marked “tower” found on helm
switch panel to energize the power tower. It connects to a
li actuator motor and a set of hydraulic rams that raise
or lower the power tower through the switch.
Make sure the operator and all aboard read and
understand the above warning.
Before energizing the tower switch explain to all
passengers that they shall maintain a safe distance from
the tower hinge mechanisms located at the base of the
power tower on the deck.
As the operator energizes the switch to hinge the tower
forward visually monitor the port and starboard deck to
ensure all passengers are clear of the hinge mechanism.
is same procedure applies for lowering the mechanism
to the cruise position.
WHEN OPERATING POWER TOWER
KEEP ALL BODY PARTS CLEAR
OF TOWER HINGE MECHANISMS
To Next Page
Loading...
Need help?
General
