CHAPTER 6
6-86
The Power Tower can be hinged forward for clearance purposes.
Normally one of the switches at the helm area is designated as arch or
tower. It connects to a lift motor and a set of hydraulic rams that raise
or lower the Power Tower when the switch is activated.
Make sure the operator and all aboard read and understand the above warning.
Before energizing the arch switch. Explain to all passengers that they must maintain
a safe distance from the tower hinge mechanisms located at the base of the power
tower on the deck. As the operator energizes the switch to hinge the
tower forward visually monitor the port and starboard deck to ensure
all passengers body parts are clear of the hinge mechanism. This same
procedure applies for lowering the mechanism to the original position.
WHEN OPERATING POWER TOWER
KEEP ALL BODY PARTS CLEAR
OF TOWER HINGE MECHANISMS.
To Next Page
Loading...
