20
Setting the Audible Beep
If the audible beep is turned ‘on’, the beep will sound when:
• You insert a test strip into the meter
• You apply blood or control solution to a test strip
• The test has ended and the result is displayed
• The meter is turned on, but you do not use it for several minutes
Meter will beep and automatically shut off
• You go into Memory Mode
Make sure the meter is off. Press the and
buttons at the same time for 5 seconds.
A beep sounds and the meter turns on. Next,
a second beep sounds and ‘SET’ shows on
the screen.
Press the button. The screen will display
‘bEP’ and the current beep setting.
To Next Page
Loading...
