ReliOn Micro - Performing a Control Solution Test

Setting Test Average Display
Press the button to cycle through the test
averaging choices: ‘oFF’ (not displayed),
‘7’ (7-day average), ‘14’ (14-day average),
or ‘30’ (30-day average).
If you select either 7-day, 14-day, or 30-day
averaging, your average test result will appear
when you recall results from memory.
See page 65.
After you set the test averaging, press the
buttontoconrmthesetting.
25
NOTE
• ‘Lo’ results are included as 20 mg/dL in the averages
• ‘Hi’ results are included as 600 mg/dL in the averages
•Testresultswiththefollowingsymboloragarenotpartofthe
resultaverage:temperatureerrorsymbol,controlsolutionag,
ordeleteag