23
Correct
Important:
If the countdown does not start:
What It Means:
You might not have applied
enough blood to the test strip.
What to Do:
Apply a second drop of blood to
the test strip. Refer to your test
strip instructions for use for the
number of seconds you have to
apply a second drop.
• If the countdown still does not start,
or if the number of seconds you
have to apply a second drop have
passed, discard the test strip, turn
off your monitor, and try again with
a new test strip.
3
At the end of the countdown:
• If the beeper is ON, listen for
the beeper.
• The blood glucose result
shows on the display window.
• The result is stored in your
monitor’s memory. You may
also write the result in your
logbook.
✔
Monitoring
Blood Glucose
To Next Page
Loading...
