Rena XPS-80 - Page 90

RENA XPS-80/90
User Guide
6-6
2) Fonts
Thirteen internal fonts may be used. This is relevant only to DOS
applications or when using a “text” driver.
The following fonts are available:
Cour12,
Cour12bo, Cour12it, Helv07, Helv10, Helv12, Helv12bo,
Helv12it, Helv13, LetGot12, TmsRm12, Bru12, OCR-A.
3) Print Quality
The print quality is specified in Dots per Inch (DPI). The display
(above) shows a print quality of 300x600dpi.
The print qualities are encoded via the following designations:
150D, 200D, 300D, 400D, 450D, 500D, 550D, 600D
.
Designation
Resolution
(Horizontal x Vertical)
150D 150 x 300
200D 150 x 600
300D 300 x 300
400D 300 x 500
450D 300 x 600
500D 500 x 500
550D 500 x 600
600D 600 x 600
4) Left margin
Settable left margin: 0 to 304 mm (0 to11.9 inch). This is mainly
relevant to DOS applications.