13B-89
DIESEL INJECTION
High-pressure pipe between the rail and injector: Removal - Refitting
F9Q
13B
a Refit one or more new high pressure pipes between
the injector rail and the diesel fuel injector.
a Using the (Mot. 1566), tighten to torque:
-the nuts for the high pressure pipe(s) between
the injector rail and the diesel injector on the in-
jector side (27 N.m),
-the nuts for the high pressure pipe(s) between
the injector rail and the diesel injector on the in-
jector rail side (37 N.m).
III - FINAL OPERATION
a Refit:
-the injector rail protector (see 13B, Diesel injec-
tion, Injector rail protector: Removal - Refitting,
page 13B-70) ,
-the engine cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).