13C-4
PREHEATING
Heater plugs Removal - Refitting
F9Q
13C
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the heater plugs
a Tighten to torque the heater plugs (15 N.m) using a
10 mm long socket.
a Connect the heater plug connectors.
III - FINAL OPERATION
a Refit:
-the injector rail protector (see 13B, Diesel injec-
tion, Injector rail protector: Removal - Refitting,
page 13B-70) ,
-the engine cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
To Next Page
Loading...
