19A-60
COOLING
Thermostat: Removal - Refitting
F4R
19A
a Fit the top hose clip on the coolant outlet unit using
the tool (Mot. 1448).
III - FINAL OPERATION
a Refit the throttle valve (see 12A, Fuel mixture,
Throttle valve: Removal - Refitting, page 12A-17)
.
a Fit the intercooler air outlet pipe.
a Refit:
-the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
-the engine undertray,
-the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
-the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
-the engine cover.
a Fill and bleed the cooling system (see 19A, Coo-
ling, Cooling circuit: Draining - Refilling, page
19A-17) .