ELECTRONIC STABILITY PROGRAM: ESP (2/2)
Disabling the function
The function is deactivated by pressing
switch 1; warning light A will come on
to warn you that the system has been
deactivated.
This action also deactivates the traction
control mechanism: the message “ASR
deselected” appears on the instru-
ment panel. Refer to the information on
“Traction control: ASR" in the following
pages.
Correct this as soon as possible by
pressing switch 1 again.
The function is reactivated automati-
cally when the ignition is switched on or
when a speed of approximately 30 mph
(50 km/h) is exceeded.
It is impossible to deselect this function
when travelling above a threshold of
approximately 30 mph (50 km/h).
Deactivating the ASR func-
tion results in the ESP func-
tion being deactivated.
Refer to the information on
the "Traction control: ASR" on the
following pages.
Operating faults
When the system detects an operat-
ing fault the message “Check ESP” ap-
pears on the instrument panel along
with the
© warning light and warn-
ing light A.
Consult your approved Dealer.
1
A
To Next Page
Loading...
Need help?
General
