HEATING/AIR CONDITIONING (3/4)
Adjusting the air temperature
Turn control B to obtain the desired
temperature. The further the slide is in
the red, the more the temperature will
be increased.
Switching air conditioning on
or off
The air conditioning is switched on (in-
dicator light illuminated) or off (indicator
light extinguished) using button F.
The air conditioning system is used
for:
– lowering the temperature inside the
passenger compartment;
– eliminating condensation.
The air conditioning does not operate
when the exterior temperature is low.
Position 0
In this position:
– the air conditioning stops automati-
cally even if button F is activated (the
indicator light remains lit);
– the ventilation speed of air in the
passenger compartment is zero;
– there is, however, a slight flow of air
when the vehicle is moving.
This position should not normally be
used.
Adjusting the ventilation
speed
Normal use
Turn control C to one of the four posi-
tions to start the ventilation system and
adjust the power.
Depending on the vehicle, select posi-
tion 1 or
for minimum ventilation and
position 4 or
y for maximum ventila-
tion.
B C
F
To Next Page
Loading...
