bulbs
changing .........................................(up to the end of the DU)
changing a bulb ....................................(up to the end of the DU)
indicators ..............................................(up to the end of the DU)
lights:
dipped beam headlights ..................(up to the end of the DU)
lights:
direction indicators ..........................(up to the end of the DU)
lights:
side lights ........................................(up to the end of the DU)
lights:
main beam headlights .....................(up to the end of the DU)
bulbs
changing .........................................(up to the end of the DU)
lights
front .................................................(up to the end of the DU)
lights
changing bulbs ................................(up to the end of the DU)
HALOGEN HEADLIGHTS: changing bulbs
Due to their reduced accessibility,
(sometimes requiring the removal of
bodywork or mechanical components)
we advise you to have your bulbs re-
placed by an approved Dealer.
Front side light
Remove cover A, then unclip bulb
holder 1 to access the bulb.
Bulb type: W5W.
Replace the bulb.
Clip bulb holder 1 back onto the head-
light.
Refit cover A.
Direction indicator lights
Turn cover B a quarter of a turn to
access the bulb.
Bulb type: PY21W.
Replace the bulb.
When the bulb has been changed,
make sure you refit the cover correctly.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
C
D
B
A
To comply with local legislations,
or as a precaution, you can obtain
an emergency kit containing a set
of spare bulbs and fuses from your
Approved dealer.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
1