Renault Modus - Wheel Trims - Wheel

hubcap tool ...........................................(up to the end of the DU)
trims ......................................................(up to the end of the DU)
5.10
ENG_UD21132_2
Enjoliveur - Roue (J77 - Renault)ENG_NU_815-9_X77_Renault_5
Wheel trim
WHEEL TRIMS - WHEEL
Wheel trim (example: wheel
trim 1)
Remove the wheel trim using hubcap
tool 2 (located in the tool kit) by en-
gaging the hook in the opening near
valve 3.
To refit it, align it with valve 3. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the valve.
Central wheel trim (example:
wheel trim 4)
Remove the wheel trim using the
hubcap tool 6 (located in the tool kit) in-
serting the tool 6 into the recess 5.
To refit it, position it in line with recess 5
and tighten it with tool 6.
We would advise you to note down
the number engraved on the tool so
that you can replace it if it is lost.
D
C
A
B
1
3
2
4
5
6