CRUISE CONTROL/SPEED LIMITER: cruise control function (2/4)
Switching on
Press switch 1 on the side showing
Ï.
The corresponding warning light on the
instrument panel comes on to indicate
that the cruise control function is in op-
eration.
When the function is activated, the
message “Cruise control” appears on
the instrument panel accompanied by
dashes.
Activating cruise control
At a steady speed (above 20 mph (30
km/h)), press switch 2 (+) or 3 (-): the
function is activated and the speed is
stored.
When the cruise control function is ac-
tivated, the
Πindicator light on the
instrument panel is surrounded by a
border.
Driving
Once a cruising speed is stored and
the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
Important: you are never-
theless advised to keep
your feet close to the pedals
in order to react if neces-
sary.
The system is designed in such a
way that it is possible to detect a dif-
ference between the programmed
speed and the speed shown on the
instrument panel.
1
2 3
54
To Next Page
Loading...
Need help?
General
